Used 1971 morris mini k turbo, fully engineered , cooper moke leyland

Seller Description

PRICE $42000- will consider trades/part trades etc
PRIVATE MESSAGE ME FOR DETAILS,
READ WHOLE AD BEFORE CONTACT
WATCH THE VIDEO, - https://youtu.be/NtSVP7pd3U8
1971 Morris mini k (kangaroo),
FULLY ENGINEERED NSW, TOP TO BOTTOM!
FULLY ENGINEERED NSW, TOP TO BOTTOM!
FULLY ENGINEERED NSW, TOP TO BOTTOM!
MOTOR
Daihatsu charade GTTI CB80 TURBO, (bonus Spare block)
R34 Skyline GTR Turbo (steel wheel)can handle 20psi
FC rx7 injectors,
LS1 coil
Haltech ecu (tuned on 98 octane)"
New lsd
GFB Blow off valve
Profec B spec 2 boost controller(-50% setting is around 15 psi)
Vl turbo bosch 004 fuel pump, filter before and after pump
Electric
Full re-wire Front to back done by auto electrician
Led headlights with solo ballists
Led dash indicators
Shatter proof lenses
Fuses & relays for all components in vehicle
Alternator charges over 14.2v constantly even with lights and fans on!!
SUSPENSION
Full alignment just done at mini classic ermington
Adjustable front track kit
Adjustable front camber kit
Adjustable front castor kit
Adjustable front & rear spax damper shocks
Adjustable front & rear HI-LO suspension trumpets
Adjustable rear camber & castor brackets
New red spot cones all around
Wheels
Continental contisportcontact 195/40 r14 73v
4x100 wheel stud pattern (redrilled front hubs and rear drums)
14 inch alloys
BRAKES
Mini ERA Metro turbo ventilated front 4 piston brakes
Mini cooper s stepped rear drums
Braided lines front & rear
Newly machined rear drums
New copper front & rear lines
New yellow tag master cylinder
COOLING
Mr enforcer custom radiator,
SPAL Thermo fan shrouded
Secondary piggy back davies craig fan boosts flow when needed
Temp sits at 180 fahrenheit thats 82 degrees!!!
INTERIOR
Full retrim by maxit auto trim
Roof lining to carpet done
PAINT
Colour code is toyota 8RO pale blue mica mettalic
Paint is 10 years old now was a bare metal respray in its time,
could use a chop and buff,if your fussy just give it a closed door flow coat,
has little nick nacks here and there nothing major will hold its own in a show and shine
Just spent 15k on it the last 3 months
These motors run 12psi factory its driven on wastegate spring pressure currently
which is 9psi and is still a hand full, you can dial up the boost controller
to -50% which will give you 15psi, i suggest you do not consider this unless you
know how to drive, these motors have handled 21psi as they are built for boost and
are a cast iron block, how fast you go is a direct result of how far you push your right
foot down, very fast 0 - 100kph
can drop at shipping depot for interstate buyers no problem
.